BPQGC - FLAMAREST 1400S COMPONENT B

  • MSDS: BPQGC
  • Manufacturer: TEXTRON SPECIALTY MATERIALS
  • Product Name: FLAMAREST 1400S COMPONENT B
  • National Stock Number: 6850-00N033331
Product Identification

Product ID:FLAMAREST 1400S COMPONENT B
MSDS Date:06/23/1992
FSC:6850
NIIN:00N033331
Kit Part:Y
MSDS Number: BPQGC

Responsible Party
TEXTRON SPECIALTY MATERIALS
2 INDUSTRIAL AVE
LOWELL, MA 01851
US

Emergency Phone: 508-452-8961

Info Phone: 508-452-8961

Preparer: PAUL F. DURKIN

Cage: 63262

Contractor
TEXTRON SPECIALTY MATERIALS, SUB OF TEXTRON INC
LOWELL, MA 01851-5107 US

Telephone: 508-452-8961

Cage: 63262

Ingredients

TOLUENE (SARA III)

CAS: 108-88-3

RTECS: XS5250000

Fraction By Weight: 25 - 30%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:IRRITATION TO EYES, SKIN, NOSE
AND THROAT. CHRONIC:PERMANENT EYE INJURY, MAY CAUSE SKIN
SENSITIZATION AND POSSIBLE DERMATITIS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:INHAL:VAP/MIST CAN IRRITATE NOSE & THROAT & CAN
CAUSE DROWSINESS, SLURRED SPEECH, HEADACHE, NAUSEA, DIZZINESS,
STUPOR & UNCON. EYE:SEVERELY IRRIT. POSS PERM INJURY. SKIN:SEVERELY
IRRITATING. MATLS CAN BE ABSORBED THRU SKIN. MATLS CAN CAUSESKIN
SENSIT & DERM. NOTE:(TOLUENE CAS# 108-88-3) APPEARS ON THE NAVY
(SUPP DATA)
Medical Cond Aggravated by Exposure:NONE KNOWN.

First Aid

First Aid:INHAL:MOVE TO FRESH AIR. GIVE ARTIFICAL RESPIRATION IF BRTHG
STOPPED. EYE:FLUSH WITH LARGE AMOUNTS OF WATER FOR AT LEAST 15
MINUTES. GET MD IMMEDIATELY. SKIN:WASH THOROUGHLY WITH SOAP &
WATER. REMOVE AND WASH CONTAMINATED CLOTHING BEFORE REUSE.
INGEST:DILUTE BY GIVING 2 GLASSES OF WATER TO DRINK. SEE MD. NEVER
GIVE ANYTHING BY MOUTH TO AN UNCONSCIOUS PERSON.

Fire Fighting

Flash Point Method:CC
Flash Point:<45F,<7C
Lower Limits:1.2%
Upper Limits:7.1%
Extinguishing Media:WATER SPRAY, CARBON DIOXIDE, DRY CHEMICAL OR FOAM.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:FLAMMABLE LIQUID.

Accidental Release

Spill Release Procedures:ELIM IGNIT SOURCES. VENT AREA. AVOID BRTHG
VAP. EVAC SPILL AREA. FLOOR MAY BE SLIPPERY; USE CARE TO AVOID
FALLING. WEAR NIOSH/MSHA APPRVD RESP SUITABLE FOR VAPORS
ENCOUNTERED. DIKE/CNTN SPILL W/INERT MATL (SAND, EARTH), SHOVEL
INTO SUITABLE CNTNR.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:LOW TEMPERATURE STORAGE CAN CAUSE
HANDLING PROBLEMS. VISCOSITY OF MATERIALS WILL INCREASE.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:FOLLOW OSHA REQUIREMENTS (29 CFR 1910.134) FOR
RESPIRATORY PROTECTION. USE A NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST AT POINT OF CONTAMINANT OR RELEASE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
EFTS OF OVEREXP:LISTING OF OCCUPATIONAL REPRODUCTIVE HAZARDS. SEEK
CONSULTATION FROM APPROPRIATE HEALTH PROFESSIONALS CONCERNING
LATEST HAZARD LIST INFORMATION AND SAFE HANDLING AND EXPOSURE
RECOMMEND ATIONS.

Chemical Properties

Boiling Pt:B.P. Text:266F,130C
Vapor Pres:<0.01 @7OF
Vapor Density:>1
Spec Gravity:1.08
Solubility in Water:SLIGHT
Appearance and Odor:DARK RED LIQUID WITH AN AMINE ODOR

Stability

Stability Indicator/Materials to Avoid:YES
NONE SPECIFIED BY MANUFACTURER.
Stability Condition to Avoid:HEAT, SPARKS AND FLAME.
Hazardous Decomposition Products:NONE SPECIFIED BY MANUFACTURER.

Disposal

Waste Disposal Methods:FOLLOW LOCAL, STATE AND FEDERAL GUIDELINES FOR
DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.